Features:
- Large High Scale RC Model
- Radio Controlled 2.4GHz 6 channel EDF jet (Aileron, Elevator, Rudder, Throttle, retracts with doors, bomb drops)
- 70mm EDF (Electric Ducted Fan) 2900kv motor.
- Full mechanical retracts with full retract bay doors and bomb bay
- It can complete every real plane simulate action, such as hanging, spin, flat spin and all other tricks.
- With its two embedded bomb cabins, it can throw bombs in high speed flying by RC system.
- Stable invert flight; Excellent stability of nosing up and down
- EPS foam material. High simulation. Unique design, fine making in details
- High speed ( up to 120km/h) depends on the accessories.
- 2.4GHz spectrum remote transceiver available, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time
More Images:
Specification:
Product Name: F117 Nighthawk 70mm Length: 1175mm Wingspan: 800mm Wing Area: 37d㎡ Material: EPS Foam Flying Weight: 1000g Thrust: More than 1200g EDF Diameter: 70mm Radio: 6 Channel Servo: 9x 9g high speed micro servos Speed Controller: 50A Brushless ESCs Control System: 2.4GHz Multifunctional Transmitter and Receiver Drive System: 2850KV Brushless Outrunner Motor Aircraft Battery: Li-Po 14.8v/2200mAh 4S (25C) - No current video at this time
Product Info:
This Aircraft is NOT A TOY. It is not suitable for children under 14 years of age. Children under the age of 14 must not operate this product alone. They must be accompanied by an experience adult at all times.
Flying Skill Level:
(Great for intermediate and skilled pilots) Extended Flight simulator practice and experienced pilot supervision recommended.
Build Level:
Moderate airplane assembly required. Internal wiring and electronics configuration is required. Please dry fit and test all electronics before gluing and securing any components.
Maintenance Level:
After every 5 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevis to insure no cracks are visible and no clevis has come loose. Check all control surfaces for solid contact between control surfaces, main wings and tail sections. Check for any loose screws anywhere screws are located. Check all wires connecting to the receiver for solid connection.
Please Note: If you have very little knowledge of Model Plane Assemble or have no Radio Control Flying experience, we would NOT recommend you to purchase this product to learn on.
Package Includes:
There is no clear industry standard definition for RTF, ARF, RXR, KIT, etc. Every manufacturer makes up their own definitions. The generally accepted definitions are: KIT means that you get all of the components of the plane, i.e.: fuselage, wings, tail, landing gear, even ducted fan, etc., pre-built but not pre-assembled; No electronic parts are included. RTF (Ready To Fly) means that you get the complete model, which includes all electronic parts—equipped model itself and RC Transmitter, Receiver, Flight Battery and 90 – 98% assembled. All “RTF” versions will have slight final assembly and setting up to do before flying. Required items: RC transmitter AA batteries and Li-po flight battery charger depending on the model aircraft purchased. RXR means that you get the RTF but no RC transmitter/Receiver. ARF means that you get the RTF but no RC transmitter/Receiver and no aircraft Battery.