Product Description
Features:
- Large High Scale RC Model
- Radio Controlled 2.4GHz, 6 Channel EDF Jet (Aileron, Elevator, Rudder, Throttle, Retractable Landing Gear)
- Excellent stability of nosing up and down.
- Full aerobatic characteristics: inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible
- Steerable Nose Wheel
- EPO foam material. High simulation. Unique design, fine making in details.
- 70mm EDF (Electric Ducted Fans) and brushless motors
- High speed (up to 100km/h) depends on the accessories.
- 2.4GHz spectrum remote transceiver available, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time
- Electronically retractable landing gear
Specification:
Product Name: | F22 70mm |
Length: | 1230mm (48.5 in) |
Wingspan: | 850mm (33.5 in) |
Thrust: | More than 1000g |
Flying Weight: | 935g (33 oz) |
Wing Area: | 27 dm2 |
Material: | EPO Foam |
EDF Diameter: | 70mm |
Radio: | 6 Channel |
Servo: | 6x 9g high speed micro servos |
Speed Controller: | 50A Brushless ESCs |
Retract System: | Mechanical Retracts |
Control System: | 2.4GHz Multifunctional Transmitter and Receiver |
Drive System: | 2850KV Outrunner Brushless Motors |
Aircraft Battery: | Li-Po 14.8v/2200mAh 4S (25C) |
Product Info:
This Aircraft is NOT A TOY. It is not suitable for children under 14 years of age. Children under the age of 14 must not operate this product alone. They must be accompanied by an experience adult at all times.
Flying Skill Level:
(Great for intermediate and skilled pilots) Extended Flight simulator practice and experienced pilot supervision recommended.
Build Level:
Moderate airplane assembly required. Internal wiring and electronics configuration is required. Please dry fit and test all electronics before gluing and securing any components.
Maintenance Level:
After every 5 flights and before and after storing airplane, please check all control surface horns and tighten the screws on surface horns if needed. Check the control pushrod clevis to insure no cracks are visible and no clevis has come loose. Check all control surfaces for solid contact between control surfaces, main wings and tail sections. Check for any loose screws anywhere screws are located. Check all wires connecting to the receiver for solid connection.
Please Note: If you have very little knowledge of Model Plane Assemble or have no Radio Control Flying experience, we would NOT recommend you to purchase this product to learn on.